1 of 3

Kubernetes microservices

Offline optimizations

Live optimizations

Optimizing cost of a Kubernetes microservice while preserving SLOs in production

In this example, you will use Akamas live optimization to minimize the cost of a Kubernetes deployment, while preserving application performance and reliability requirements.

Prerequisites

In this example, you need:

an Akamas instance
a Kubernetes cluster, with a deployment to be optimized
the kubectl command installed in the Akamas instance, configured to access the target Kubernetes and with privileges to get and update the deployment configurations
a supported telemetry data source (e.g. Prometheus or Dynatrace) configured to collect metrics from the target Kubernetes cluster

Optimization setup

Optimization packs

This example leverages the following optimization packs:

System

The system represents the Kubernetes deployment to be optimized (let's call it "frontend"). You can create a system.yaml manifest like this:

name: frontend
description: Kubernetes frontend deployment

Create the new system resource:

akamas create system system.yaml

The system will then have two components:

A Kubernetes container component, which contains container-level metrics like CPU usage and parameters to be tuned like CPU limits
A Web Application component, which contains service-level metrics like throughput and response time

In this example, we assume the deployment to be optimized is called frontend, with a container named server, and is located within the boutique namespace. We also assume that Dynatrace is used as a telemetry provider.

Kubernetes component

Create a component-container.yaml manifest like the following:

name: container
description: Kubernetes container, part of the frontend deployment
componentType: Kubernetes Container
properties:
  dynatrace:
    type: CONTAINER_GROUP_INSTANCE
    kubernetes:
      namespace: boutique
      containerName: server
      basePodName: frontend-*

Then run:

akamas create component component-container.yaml frontend

Now create a component-webapp.yaml manifest like the following:

name: webapp
description: The service related to the frontend deployment
componentType: Web Application
properties:
  dynatrace:
    id: <TELEMETRY_DYNATRACE_WEBAPP_ID>

Then run:

akamas create component component-webapp.yaml frontend

Workflow

The workflow in this example is composed of three main steps:

Update the Kubernetes deployment manifest with the Akamas recommended deployment parameters (CPU and memory limits)
Apply the new parameters (kubectl apply)
Wait for the rollout to complete
Sleep for 30 minutes (observation interval)

Create a workflow.yaml manifest like the following:

name: frontend
tasks:
  - name: configure
    operator: FileConfigurator
    arguments:
      source:
        hostname: mymachine
        username: user
        key: /home/user/.ssh/key
        path: frontend.yaml.templ
      target:
        hostname: mymachine
        username: user
        key: /home/user/.ssh/key
        path: frontend.yaml

  - name: apply
    operator: Executor
    arguments:
      timeout: 5m
      host:
        hostname: mymachine
        username: user
        key: /home/user/.ssh/key
      command: kubectl apply -f frontend.yaml

  - name: verify
    operator: Executor
    arguments:
      timeout: 5m
      host:
        hostname: mymachine
        username: user
        key: /home/user/.ssh/key
      command: kubectl rollout status --timeout=5m deployment/frontend -n boutique;

  - name: observe
    operator: Sleep
    arguments:
      seconds: 1800

Then run:

akamas create workflow workflow.yaml

Telemetry

Create the telemetry.yamlmanifest like the following:

provider: Dynatrace
config:
  url: <YOUR_DYNATRACE_URL>
  token: <YOUR_DYNATRACE_TOKEN>
  pushEvents: false

Then run:

akamas create telemetry-instance telemetry.yaml frontend

Study

In this live optimization:

the goal is to reduce the cost of the Kubernetes deployment. In this example, the cost is based on the amount of CPU and memory limits (assuming requests = limits).
the approval mode is set to manual, a new recommendation is generated daily
to avoid impacting application performance, constraints are specified on desired response times and error rates
to avoid impacting application reliability, constraints are specified on peak resource usage and out-of-memory kills
the parameters to be tuned are the container CPU and memory limits (we assume requests=limits in the deployment file)

Create a study.yaml manifest like the following:

name: frontend
system: frontend
workflow: frontend
requireApproval: true

goal:
  objective: minimize
  function:
    formula: (((container.container_cpu_limit/1000) * 3) + (container.container_memory_limit/(1024*1024*1024)))
  constraints:
    absolute:
      - name: Response Time
        formula: webapp.requests_response_time <= 300
      - name: Error Rate
        formula: webapp.service_error_rate:max <= 0.05
      - name: Container CPU saturation
        formula: container.container_cpu_util:p95 < 0.8
      - name: Container memory saturation
        formula: container.container_memory_util:max < 0.7
      - name: Container out-of-memory kills
        formula: container.container_oom_kills_count == 0

parametersSelection:
  - name: container.cpu_limit
    domain: [300, 1000]
  - name: container.memory_limit
    domain: [800, 1536]

windowing:
  type: trim
  trim: [5m, 0m]
  task: observe

workloadsSelection:
  - name: webapp.requests_throughput

steps:
  - name: baseline
    type: baseline
    numberOfTrials: 48
    values:
      container.cpu_limit: 1000
      container.memory_limit: 1536

  - name: optimize
    type: optimize
    numberOfTrials: 48
    numberOfExperiments: 100
    numberOfInitExperiments: 0
    maxFailedExperiments: 50

Then run:

akamas create study study.yaml

You can now follow the live optimization progress and explore the results using the Akamas UI for Live optimizations.

Optimize cost of a Java microservice on Kubernetes while preserving SLOs in production

In this guide, you optimize the cost (or resource footprint) of a Java microservice running on Kubernetes. The study tunes both pod resource settings (CPU and memory requests and limits) and JVM options (max heap size, garbage collection algorithm, etc.) at the same time, while also taking into account your application performance and reliability requirements (SLOs). This optimization happens in production, leveraging Akamas live optimization capabilities.

Prerequisites

an Akamas instance
a Kubernetes cluster, with a Java-based deployment to be optimized
a supported telemetry data source configured to collect metrics from the target Kubernetes cluster (see here for the full list)
a way to apply configuration changes recommended by Akamas to the target deployment. In this guide, Akamas interacts directly with the Kubernetes APIs via kubectl.You need a service account with permissions to update your deployment (see below for other integration options)

Optimization setup

In this guide, we assume the following setup:

the Kubernetes deployment to be optimized is called adservice (in the boutique namespace)
in the deployment, there is a container named server, where the application JVM runs
Dynatrace is used as an observability tool

Let's set up the Akamas optimization for this use case.

System

For this optimization, you need the following components to model the adservice tech stack:

A Kubernetes container component, which contains container-level metrics like CPU usage and parameters to be tuned like CPU limits (from the Kubernetes optimization pack)
A Java OpenJDK component, which contains JVM-level metrics like heap memory usage and parameters to be tuned like the garbage collector algorithm (from the Java OpenJDK optimization pack)
A Web Application component, which contains service-level metrics like throughput and response time of the microservice (from the Web application optimization pack)

Let's start by creating the system, which represents the Kubernetes deployment to be optimized. To create it, write a system.yaml manifest like this:

name: adservice
description: The Adservice deployment

Then run:

akamas create system system.yaml

Now create a component-container.yaml manifest like the following:

name: server
description: Kubernetes container in the frontend deployment
componentType: Kubernetes Container
properties:
  dynatrace:
    type: CONTAINER_GROUP_INSTANCE
    kubernetes:
      namespace: boutique
      containerName: server
      basePodName: frontend-*

Notice the component includes properties that specify how Dynatrace telemetry will look up this container in the Kubernetes cluster (the same will happen for the following components).

These properties are dependent upon the telemetry provider you are using.

Then run:

akamas create component component-container.yaml frontend

Next, create a component-jvm.yaml manifest like the following:

name: jvm
description: JVM of the frontend deployment
componentType: java-openjdk-17
properties:
  dynatrace:
    type: PROCESS
    tags:
     akamas: adservice-jvm

Then run:

akamas create component component-jvm.yaml adservice

Now create a component-webapp.yaml manifest like the following:

name: webapp
description: The HTTP service of the adservice deployment
componentType: Web Application
properties:
  dynatrace:
    type: SERVICE
    name: adservice

Then run:

akamas create component component-webapp.yaml frontend

Workflow

To optimize a Kubernetes microservice in production, you need to create a workflow that defines how the new configuration recommended by Akamas will be deployed in production.

Let's explore the high-level tasks required in this scenario and the options you have to adapt it to your environment:

1) Update the Kubernetes deployment configuration

The first step is to update the Kubernetes deployment with the new configuration. This can be done in several ways depending on your environment and processes:

A simple option is to let Akamas directly update the deployment leveraging the Kubernetes APIs via kubectl commands
Another option is to follow an Infrastructure-as-code approach, where the configuration change is managed via pull requests to a Git repository, leveraging your pipelines to deploy the change in production

In this guide, we take the first option and use the kubectl patch command to configure the new deployment. These commands are executed from the toolbox, an Akamas utility that can be enabled in an Akamas installation on Kubernetes. Make sure that kubectl is configured correctly to connect to your Kubernetes cluster and can update your target deployment. See here for more details.

2) Wait for the new deployment to be rolled out in production

In a live optimization, Akamas needs to understand when the new deployment rollout is complete and whether it was completed successfully or not. This is key information for Akamas AI to observe and optimize your applications safely.

This task can be done in several ways depending on how you manage changes, as discussed in the previous task:

A simple option is to use thekubectl rollout command to wait for the deployment rollout completion. This is the approach used in this guide
Another option is to follow an Infrastructure-as-code approach, where a change is managed via pull requests to a Git repository, leveraging your pipelines to deploy in production. In this situation, the deployment process is executed externally and is not controlled by Akamas. Hence, the workflow task will periodically poll the Kubernetes deployment to recognize when the new deployment has landed in production

3) Observe how the application behaves with the new configuration

In a live optimization, Akamas simply needs to wait for a given observation interval, while the application works in production with the new configuration. Telemetry metrics will be collected during this observation period and will be analyzed by Akamas AI to recommend the next configuration.

A 30-minute observation interval is recommended for most situations.

Let's now create a workflow.yaml manifest like the following:

name: adservice
tasks:
  - name: configure
    operator: FileConfigurator
    arguments:
      source:
        hostname: toolbox
        username: akamas
        password: <your-toolbox-password>
        path: adservice.yaml.templ
      target:
        hostname: toolbox
        username: akamas
        password: <your-toolbox-password>
        path: adservice.yaml

  - name: apply
    operator: Executor
    arguments:
      timeout: 5m
      host:
        hostname: toolbox
        username: akamas
        password: <your-toolbox-password>
      command: kubectl apply -f adservice.yaml

  - name: verify
    operator: Executor
    arguments:
      timeout: 5m
      host:
        hostname: toolbox
        username: akamas
        password: <your-toolbox-password>
      command: kubectl rollout status --timeout=5m deployment/adservice -n boutique;

  - name: observe
    operator: Sleep
    arguments:
      seconds: 1800

Then run:

akamas create workflow workflow.yaml

Telemetry

To collect metrics of your target Kubernetes deployment, you create a telemetry instance based on your observability setup.

Create a telemetry.yamlmanifest like the following:

provider: Dynatrace
config:
  url: <YOUR_DYNATRACE_URL>
  token: <YOUR_DYNATRACE_TOKEN>

Then run:

akamas create telemetry-instance telemetry.yaml adservice

Study

It's now time to create the Akamas study to achieve your optimization objectives.

Let's explore how the study is designed by going through the main concepts. The complete study manifest is available at the bottom.

Goal

Your overall objective is to reduce the cost (or resource footprint) of a Kubernetes deployment. To do that, you need to define the goal, which is a metric (or combination of metrics) representing the deployment cost to be minimized.

There are different approaches to measuring the cost of Kubernetes deployments:

A simple approach is to consider that Kubernetes allocates infrastructure resources based on pod resource requests (CPU and memory). Hence, the cost of a deployment can be derived from the deployment aggregate CPU and memory requests. In this guide, we use this approach and define the study goal as the sum of CPU and memory requests of the container to be optimized
Alternatively, the cost of a Kubernetes deployment can also be collected from external data sources that provide actual cost metrics like OpenCost. In this case, the study goal can be defined by leveraging the cost metric

Notice that weighting factors can be used in the goal formula to specify the importance of CPU vs memory resources. For example, the cloud price of 1 CPU is about 9 times that of 1 GB of RAM. You can customize those weights based on your requirements so that Akamas knows how to truly reach the most cost-efficient configuration in your specific context.

Constraints

When optimizing for cost reduction (or resource footprint), it's key not to impact application response time or introduce risks of availability and reliability issues. To ensure this, you can define your performance and reliability requirements (SLOs) as metric constraints.

In this study:

to ensure application performance, constraints are specified on application response times and error rate
to ensure application reliability, constraints are specified on:
- container peak CPU and memory utilization, and container out-of-memory kills
- JVM garbage collection time %, to prevent out-of-memory in the JVM heap memory

Parameters

To achieve cost-efficient and reliable Java-based microservices, Kubernetes container resources and JVM runtime options must be configured optimally and tuned jointly, as they are heavily interconnected.

To do that, the study includes the following parameters:

Kubernetes container: CPU and memory requests and limits
JVM: heap size and garbage collection (GC) algorithms

The study also includes parameter constraints to ensure that recommended configurations are safe and comply with best practices. In particular:

Kubernetes container memory limit must be higher than JVM heap size, plus a buffer to account for JVM off-heap memory usage
CPU limits must be at most 2x CPU requests, to avoid excessive over-commitment of CPU limits in the cluster

Notice that the parameters and constraints can change depending on your policies. For example, it is a best practice to set memory requests == limits to avoid pod eviction. In this case, you only include memory requests in the study and set limits to the same value in the deployment file.

Workload

Akamas live optimization considers the application's workload to recommend new configurations that are optimal for the goal (e.g. reduce cost) while meeting all metric constraints (e.g., latency and error rates).

For Kubernetes microservices, the workload is typically the throughput (requests/sec) of the microservice API endpoints. This is the approach used in this guide.

Approval mode and recommendation frequency

In this live optimization, the manual approval is set to required, meaning that Akamas will ask for user approval when a new configuration gets generated. Once you approve it, the workflow will be executed, and the new configuration will be deployed to production according to the integration strategy you have defined above.

You can set it to false to enable fully autonomous optimization: in this case, as soon as a new configuration gets generated, the workflow will be executed without any human involvement.

The recommendation frequency can be chosen by leveraging the numberOfTrials parameter. As the workflow duration is set to 30 minutes, in order to have a new configuration generated daily, set the number of trials to 48.

You can now create a study.yaml manifest like the following:

name: adservice - optimize costs tuning K8s and JVM
system: adservice
workflow: adservice

goal:
  name: Cost
  objective: minimize
  function:
    formula: ((server.container_cpu_limit)/1000)*29 + ((((server.container_memory_limit)/1024)/1024)/1024)*3
  constraints:
    absolute: 
      - name: Application response time degradation
        formula: web_application.requests_response_time:max <= 5
      - name: Application error rate degradation
        formula: web_application.requests_error_rate:max <= 0.02
      - name: Container CPU saturation
        formula: server.container_cpu_util_max:p95 < 1
      - name: Container memory saturation
        formula: server.container_memory_util_max:max < 1
      - name: Container out-of-memory
        formula: server.container_restarts == 0
      - name: JVM heap saturation
        formula: jvm.jvm_gc_time:max < 0.05

windowing:
  type: trim
  trim: [2m, 0s]
  task: observe

parametersSelection:
  - name: server.cpu_request
    domain: [10, 181]
  - name: server.cpu_limit
    domain: [10, 181]
  - name: server.memory_request
    domain: [16, 2048]
  - name: jvm.jvm_maxHeapSize
    domain: [16, 1024]
  - name: jvm.jvm_gcType

parameterConstraints:
  - name: JVM off-heap safety buffer
    formula: jvm.jvm_maxHeapSize + 1000 < server.memory_limit
  - name: CPU limit at most 2x of requests
    formula: server.cpu_limit <= server.cpu_request * 2

workloadsSelection:
  - name: web_application.requests_throughput

numberOfTrials: 48
steps:
  - name: baseline
    type: baseline
    values:
      server.cpu_limit: 1000
      server.memory_limit: 2048
      jvm.jvm_maxHeapSize: 1024
      jvm.jvm_gcType: Serial

  - name: optimize
    type: optimize
    numberOfExperiments: 21

Then run:

akamas create study study.yaml

You can now follow the live optimization progress and explore the results using the Akamas UI.

Artifact templates

To quickly set up this optimization, download the Akamas template manifests and update the values file to match your needs. Then, create your optimization using the Akamas scaffolding.

Optimizing cost of a Kubernetes microservice while preserving SLOs in production

In this example, you will use Akamas live optimization to minimize the cost of a Kubernetes deployment, while preserving application performance and reliability requirements.

Prerequisites

In this example, you need:

an Akamas instance
a Kubernetes cluster, with a deployment to be optimized
the kubectl command installed in the Akamas instance, configured to access the target Kubernetes and with privileges to get and update the deployment configurations
a supported telemetry data source (e.g. Prometheus or Dynatrace) configured to collect metrics from the target Kubernetes cluster

Optimization setup

Optimization packs

This example leverages the following optimization packs:

System

The system represents the Kubernetes deployment to be optimized (let's call it "frontend"). You can create a system.yaml manifest like this:

name: frontend
description: Kubernetes frontend deployment

Create the new system resource:

akamas create system system.yaml

The system will then have two components:

A Kubernetes container component, which contains container-level metrics like CPU usage and parameters to be tuned like CPU limits
A Web Application component, which contains service-level metrics like throughput and response time

Kubernetes component

Create a component-container.yaml manifest like the following:

name: container
description: Kubernetes container, part of the frontend deployment
componentType: Kubernetes Container
properties:
  dynatrace:
    type: CONTAINER_GROUP_INSTANCE
    kubernetes:
      namespace: boutique
      containerName: server
      basePodName: frontend-*

Then run:

akamas create component component-container.yaml frontend

Now create a component-webapp.yaml manifest like the following:

name: webapp
description: The service related to the frontend deployment
componentType: Web Application
properties:
  dynatrace:
    id: <TELEMETRY_DYNATRACE_WEBAPP_ID>

Then run:

akamas create component component-webapp.yaml frontend

Workflow

The workflow in this example is composed of three main steps:

Update the Kubernetes deployment manifest with the Akamas recommended deployment parameters (CPU and memory limits)
Apply the new parameters (kubectl apply)
Wait for the rollout to complete
Sleep for 30 minutes (observation interval)

Create a workflow.yaml manifest like the following:

name: frontend
tasks:
  - name: configure
    operator: FileConfigurator
    arguments:
      source:
        hostname: mymachine
        username: user
        key: /home/user/.ssh/key
        path: frontend.yaml.templ
      target:
        hostname: mymachine
        username: user
        key: /home/user/.ssh/key
        path: frontend.yaml

  - name: apply
    operator: Executor
    arguments:
      timeout: 5m
      host:
        hostname: mymachine
        username: user
        key: /home/user/.ssh/key
      command: kubectl apply -f frontend.yaml

  - name: verify
    operator: Executor
    arguments:
      timeout: 5m
      host:
        hostname: mymachine
        username: user
        key: /home/user/.ssh/key
      command: kubectl rollout status --timeout=5m deployment/frontend -n boutique;

  - name: observe
    operator: Sleep
    arguments:
      seconds: 1800

Then run:

akamas create workflow workflow.yaml

Telemetry

Create the telemetry.yamlmanifest like the following:

provider: Dynatrace
config:
  url: <YOUR_DYNATRACE_URL>
  token: <YOUR_DYNATRACE_TOKEN>
  pushEvents: false

Then run:

akamas create telemetry-instance telemetry.yaml frontend

Study

In this live optimization:

the goal is to reduce the cost of the Kubernetes deployment. In this example, the cost is based on the amount of CPU and memory limits (assuming requests = limits).
the approval mode is set to manual, a new recommendation is generated daily
to avoid impacting application performance, constraints are specified on desired response times and error rates
to avoid impacting application reliability, constraints are specified on peak resource usage and out-of-memory kills
the parameters to be tuned are the container CPU and memory limits (we assume requests=limits in the deployment file)

Create a study.yaml manifest like the following:

name: frontend
system: frontend
workflow: frontend
requireApproval: true

goal:
  objective: minimize
  function:
    formula: (((container.container_cpu_limit/1000) * 3) + (container.container_memory_limit/(1024*1024*1024)))
  constraints:
    absolute:
      - name: Response Time
        formula: webapp.requests_response_time <= 300
      - name: Error Rate
        formula: webapp.service_error_rate:max <= 0.05
      - name: Container CPU saturation
        formula: container.container_cpu_util:p95 < 0.8
      - name: Container memory saturation
        formula: container.container_memory_util:max < 0.7
      - name: Container out-of-memory kills
        formula: container.container_oom_kills_count == 0

parametersSelection:
  - name: container.cpu_limit
    domain: [300, 1000]
  - name: container.memory_limit
    domain: [800, 1536]

windowing:
  type: trim
  trim: [5m, 0m]
  task: observe

workloadsSelection:
  - name: webapp.requests_throughput

steps:
  - name: baseline
    type: baseline
    numberOfTrials: 48
    values:
      container.cpu_limit: 1000
      container.memory_limit: 1536

  - name: optimize
    type: optimize
    numberOfTrials: 48
    numberOfExperiments: 100
    numberOfInitExperiments: 0
    maxFailedExperiments: 50

Then run:

akamas create study study.yaml

You can now follow the live optimization progress and explore the results using the Akamas UI for Live optimizations.

Optimize cost of a Java microservice on Kubernetes while preserving SLOs in production

Prerequisites

an Akamas instance
a Kubernetes cluster, with a Java-based deployment to be optimized
a supported telemetry data source configured to collect metrics from the target Kubernetes cluster (see here for the full list)
a way to apply configuration changes recommended by Akamas to the target deployment. In this guide, Akamas interacts directly with the Kubernetes APIs via kubectl.You need a service account with permissions to update your deployment (see below for other integration options)

Optimization setup

In this guide, we assume the following setup:

the Kubernetes deployment to be optimized is called adservice (in the boutique namespace)
in the deployment, there is a container named server, where the application JVM runs
Dynatrace is used as an observability tool

Let's set up the Akamas optimization for this use case.

System

For this optimization, you need the following components to model the adservice tech stack:

A Kubernetes container component, which contains container-level metrics like CPU usage and parameters to be tuned like CPU limits (from the Kubernetes optimization pack)
A Java OpenJDK component, which contains JVM-level metrics like heap memory usage and parameters to be tuned like the garbage collector algorithm (from the Java OpenJDK optimization pack)
A Web Application component, which contains service-level metrics like throughput and response time of the microservice (from the Web application optimization pack)

Let's start by creating the system, which represents the Kubernetes deployment to be optimized. To create it, write a system.yaml manifest like this:

name: adservice
description: The Adservice deployment

Then run:

akamas create system system.yaml

Now create a component-container.yaml manifest like the following:

name: server
description: Kubernetes container in the frontend deployment
componentType: Kubernetes Container
properties:
  dynatrace:
    type: CONTAINER_GROUP_INSTANCE
    kubernetes:
      namespace: boutique
      containerName: server
      basePodName: frontend-*

Notice the component includes properties that specify how Dynatrace telemetry will look up this container in the Kubernetes cluster (the same will happen for the following components).

These properties are dependent upon the telemetry provider you are using.

Then run:

akamas create component component-container.yaml frontend

Next, create a component-jvm.yaml manifest like the following:

name: jvm
description: JVM of the frontend deployment
componentType: java-openjdk-17
properties:
  dynatrace:
    type: PROCESS
    tags:
     akamas: adservice-jvm

Then run:

akamas create component component-jvm.yaml adservice

Now create a component-webapp.yaml manifest like the following:

name: webapp
description: The HTTP service of the adservice deployment
componentType: Web Application
properties:
  dynatrace:
    type: SERVICE
    name: adservice

Then run:

akamas create component component-webapp.yaml frontend

Workflow

To optimize a Kubernetes microservice in production, you need to create a workflow that defines how the new configuration recommended by Akamas will be deployed in production.

Let's explore the high-level tasks required in this scenario and the options you have to adapt it to your environment:

1) Update the Kubernetes deployment configuration

The first step is to update the Kubernetes deployment with the new configuration. This can be done in several ways depending on your environment and processes:

A simple option is to let Akamas directly update the deployment leveraging the Kubernetes APIs via kubectl commands
Another option is to follow an Infrastructure-as-code approach, where the configuration change is managed via pull requests to a Git repository, leveraging your pipelines to deploy the change in production

2) Wait for the new deployment to be rolled out in production

This task can be done in several ways depending on how you manage changes, as discussed in the previous task:

A simple option is to use thekubectl rollout command to wait for the deployment rollout completion. This is the approach used in this guide
Another option is to follow an Infrastructure-as-code approach, where a change is managed via pull requests to a Git repository, leveraging your pipelines to deploy in production. In this situation, the deployment process is executed externally and is not controlled by Akamas. Hence, the workflow task will periodically poll the Kubernetes deployment to recognize when the new deployment has landed in production

3) Observe how the application behaves with the new configuration

A 30-minute observation interval is recommended for most situations.

Let's now create a workflow.yaml manifest like the following:

name: adservice
tasks:
  - name: configure
    operator: FileConfigurator
    arguments:
      source:
        hostname: toolbox
        username: akamas
        password: <your-toolbox-password>
        path: adservice.yaml.templ
      target:
        hostname: toolbox
        username: akamas
        password: <your-toolbox-password>
        path: adservice.yaml

  - name: apply
    operator: Executor
    arguments:
      timeout: 5m
      host:
        hostname: toolbox
        username: akamas
        password: <your-toolbox-password>
      command: kubectl apply -f adservice.yaml

  - name: verify
    operator: Executor
    arguments:
      timeout: 5m
      host:
        hostname: toolbox
        username: akamas
        password: <your-toolbox-password>
      command: kubectl rollout status --timeout=5m deployment/adservice -n boutique;

  - name: observe
    operator: Sleep
    arguments:
      seconds: 1800

Then run:

akamas create workflow workflow.yaml

Telemetry

To collect metrics of your target Kubernetes deployment, you create a telemetry instance based on your observability setup.

Create a telemetry.yamlmanifest like the following:

provider: Dynatrace
config:
  url: <YOUR_DYNATRACE_URL>
  token: <YOUR_DYNATRACE_TOKEN>

Then run:

akamas create telemetry-instance telemetry.yaml adservice

Study

It's now time to create the Akamas study to achieve your optimization objectives.

Let's explore how the study is designed by going through the main concepts. The complete study manifest is available at the bottom.

Goal

There are different approaches to measuring the cost of Kubernetes deployments:

A simple approach is to consider that Kubernetes allocates infrastructure resources based on pod resource requests (CPU and memory). Hence, the cost of a deployment can be derived from the deployment aggregate CPU and memory requests. In this guide, we use this approach and define the study goal as the sum of CPU and memory requests of the container to be optimized
Alternatively, the cost of a Kubernetes deployment can also be collected from external data sources that provide actual cost metrics like OpenCost. In this case, the study goal can be defined by leveraging the cost metric

Constraints

In this study:

to ensure application performance, constraints are specified on application response times and error rate
to ensure application reliability, constraints are specified on:
- container peak CPU and memory utilization, and container out-of-memory kills
- JVM garbage collection time %, to prevent out-of-memory in the JVM heap memory

Parameters

To do that, the study includes the following parameters:

Kubernetes container: CPU and memory requests and limits
JVM: heap size and garbage collection (GC) algorithms

The study also includes parameter constraints to ensure that recommended configurations are safe and comply with best practices. In particular:

Kubernetes container memory limit must be higher than JVM heap size, plus a buffer to account for JVM off-heap memory usage
CPU limits must be at most 2x CPU requests, to avoid excessive over-commitment of CPU limits in the cluster

Workload

For Kubernetes microservices, the workload is typically the throughput (requests/sec) of the microservice API endpoints. This is the approach used in this guide.

Approval mode and recommendation frequency

You can set it to false to enable fully autonomous optimization: in this case, as soon as a new configuration gets generated, the workflow will be executed without any human involvement.

You can now create a study.yaml manifest like the following:

name: adservice - optimize costs tuning K8s and JVM
system: adservice
workflow: adservice

goal:
  name: Cost
  objective: minimize
  function:
    formula: ((server.container_cpu_limit)/1000)*29 + ((((server.container_memory_limit)/1024)/1024)/1024)*3
  constraints:
    absolute: 
      - name: Application response time degradation
        formula: web_application.requests_response_time:max <= 5
      - name: Application error rate degradation
        formula: web_application.requests_error_rate:max <= 0.02
      - name: Container CPU saturation
        formula: server.container_cpu_util_max:p95 < 1
      - name: Container memory saturation
        formula: server.container_memory_util_max:max < 1
      - name: Container out-of-memory
        formula: server.container_restarts == 0
      - name: JVM heap saturation
        formula: jvm.jvm_gc_time:max < 0.05

windowing:
  type: trim
  trim: [2m, 0s]
  task: observe

parametersSelection:
  - name: server.cpu_request
    domain: [10, 181]
  - name: server.cpu_limit
    domain: [10, 181]
  - name: server.memory_request
    domain: [16, 2048]
  - name: jvm.jvm_maxHeapSize
    domain: [16, 1024]
  - name: jvm.jvm_gcType

parameterConstraints:
  - name: JVM off-heap safety buffer
    formula: jvm.jvm_maxHeapSize + 1000 < server.memory_limit
  - name: CPU limit at most 2x of requests
    formula: server.cpu_limit <= server.cpu_request * 2

workloadsSelection:
  - name: web_application.requests_throughput

numberOfTrials: 48
steps:
  - name: baseline
    type: baseline
    values:
      server.cpu_limit: 1000
      server.memory_limit: 2048
      jvm.jvm_maxHeapSize: 1024
      jvm.jvm_gcType: Serial

  - name: optimize
    type: optimize
    numberOfExperiments: 21

Then run:

akamas create study study.yaml

You can now follow the live optimization progress and explore the results using the Akamas UI.

Artifact templates

To quickly set up this optimization, download the Akamas template manifests and update the values file to match your needs. Then, create your optimization using the Akamas scaffolding.

akamas-templates-optimize-costs-k8s-jvm-live.tgz